Sharp AQUOS LC-32BX5H Посібник з експлуатації - Сторінка 34
Переглянути онлайн або завантажити pdf Посібник з експлуатації для РК-ТЕЛЕВІЗОР Sharp AQUOS LC-32BX5H. Sharp AQUOS LC-32BX5H 50 сторінок. Lcd colour television
Друкувати сторінку
Useful adjustment settings
Audio Only
When listening to music from a music programme, you
can set the display off and enjoy audio only.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Audio Only", and then
press ENTER.
4
Press a/b to select "On", and then press
ENTER.
Selected item
On
Audio is output without screen image.
Off
Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to "Off".
DNR (Digital Noise Reduction)
Produces a clearer video image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "DNR", and then press
ENTER.
4
Press a/b to select the desired level, and
then press ENTER.
Off
High
Low
Description
Input Select
Selecting input source
Can use for selecting the input source.
1
Press TV/VIDEO on the remote control unit
or TV/VIDEO on the TV.
2
Press TV/VIDEO on the remote control unit
or TV/VIDEO on the TV to select the input
source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
Selecting input signal type
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Input Select", and then
press ENTER.
4
Press a/b to select an input source among
"Input1", "Input2" and "Input3", and then
press ENTER.
5
Press a/b to select a signal type you want
to set, and then press ENTER.
Input source
Input 1
Input 2
Input 3
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
• When the signal type is set to "Auto", the input terminal
where cable is connected is automatically selected.
• When the signal type is set to "Auto" and multiple video
signal cables are connected, the signal type is selected
in the following prioritised order:
Input 1/Input 2: Components Video
Input 3: S-Videos Video
Selectable item
Auto, Component, Video
Auto, Component, Video
Auto, S-Video, Video
33