Crestron TMK-6X-DSW Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з монтажу для Стелажі та підставки Crestron TMK-6X-DSW. Crestron TMK-6X-DSW 16 сторінок. Trim ring kits for the tps-6x-dsw
Друкувати сторінкуTrim Ring Mount Kits for the TPS-6X-DSW
Setup
2 • Trim Ring Mount Kits for the TPS-6X-DSW: TMK/WMKT-6X-DSW
Supplied Hardware
The TMK-6X-DSW consists of a metal trim ring that attaches to the BB-6X-DSW or
PMK-6X-DSW. The WMKT-6X-DSW consists of the trim ring found in the
TMK-6X-DSW as well as a mounting plate, cutout template and mounting screws.
The mounting plate provides the necessary support for post-construction
applications. An overlay cutout template (4506370) is supplied which is similar to a
frame, the inner area of the frame is the shape of the required opening. Remove the
center of the frame in order to use the template, refer to the illustration on page 3.
Supplied Hardware for the TMK-6X-DSW and WMKT-6X-DSW
DESCRIPTION
Metal, Plate, Trim Ring
Metal, Plate, Mounting
(WMKT-6X-DSW only)
Screw, #06-32 x 1 1/2", Pan, Phil
(WMKT-6X-DSW only)
Overlay, Template, Wall Cutout
(WMKT-6X-DSW Only)
The dimensions of the TMK-6X-DSW and WMKT-6X-DSW are shown below and
on the next page.
Dimensional Drawing – Trim Ring
6.39 in
(16.23 cm)
Crestron TMK/WMKT-6X-DSW
PART NUMBER
2022808
2022811
2007254
4506370
9.28 in
(23.58 cm)
Installation Guide – DOC. 6780A
QUANTITY
1
1
4
1
1.04 in
(26.27 cm)
4.00 in
(10.16 cm)
0.52 in
(1.33 cm)
2.23 in
(5.66 cm)