DIGISYSTEM AFV2000 Інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Джерело живлення DIGISYSTEM AFV2000. DIGISYSTEM AFV2000 9 сторінок. Variable frequency vibrators power supply
Також для DIGISYSTEM AFV2000: Інструкція з експлуатації (9 сторінок), Інструкція з експлуатації (9 сторінок)
Друкувати сторінку
DEVICE DESCRIPTION
The vibrators power supply is very compact and easy to install.
With reference to the drawing at the bottom of this manual, it will be very simple to identify the
most important components.
Two holes (diam. 6 mm) will allow to fix the box to the structure which will support the device.
Electrical connections are made with a 6 and with a 9 poles terminal box (see wiring options
table at page 9).
The mains supply is protected with fuses inside the box.
The vibration frequency is selected with 4 rotating selectors (SW1) located on front panel (the
most left digit are hundreds of Hz, the second are tens, the third are units and the most right are
tenths of Hz).
The vibration intensity may be regulated with a potentiometer or through a voltage reference 0-
5V (the minimum and maximum limits of potentiometer may be regulated with trimmers MIN e
MAX accessible on front panel).
Overloads are limited electronically (by a circuit with autoreset) and are signaled from a red led.
The power supply is shipped with autostart on power-on (switch SW2 on front panel = up).
3
Downloaded from StockCheck.com