Sharp AQUOS CD-BA250 Посібник з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стереосистема Sharp AQUOS CD-BA250. Sharp AQUOS CD-BA250 32 сторінки. Led backlight tv
Також для Sharp AQUOS CD-BA250: Короткий посібник (4 сторінок), Посібник з експлуатації (36 сторінок)
Друкувати сторінку
„ Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to the plus
(+) terminal.
Right speaker
Red
Black
Caution:
z Use speakers with an impedance of 6 ohms or more, as lower impedance speakers
can damage the unit.
z Do not mistake the right and the left channels. The
right speaker is the one on the right side when you face
the unit.
z Do not let the bare speaker wires touch each other.
z Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
z Do not stand or sit on the speakers. You may be in-
jured.
„ FM/AM loop antenna connection
Connect the FM/AM loop antenna to the ANTENNA jack.
Left speaker
Position the FM antenna wire and rotate the AM loop antenna for optimum reception.
Place the AM loop antenna on a shelf, or attach it to a stand or a wall.
Notes:
z Placing the antenna on the unit or near the AC power cord may cause noise
pickup. Place the antenna away from the unit for better reception.
z Do not connect the attached FM antenna to an external FM antenna. Otherwise,
trouble may occur.
Installing the AM loop antenna:
< Assembling >
< Attaching to the wall >
„ Connecting the AC power cord
Incorrect
After checking all the connections have been made correctly, plug the AC
power cord of this unit into the AC outlet. If you plug the unit first, the unit
will enter the demonstration mode (see page 13).
Note:
Unplug the unit if it will not be used for a prolonged period of time.
Wall
Screws (not supplied)
Demonstration mode (See page 13.)
00/12/4
CD-BA250(U)2.fm
11