Sharp CD DHS1050P Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стереосистема Sharp CD DHS1050P. Sharp CD DHS1050P 17 сторінок. Mini component system
Друкувати сторінку
Listening to a CD or MP3/WMA disc (continued)
Note:
If a disc tray with no disc is selected, playback will not start
and the disc indicator will disappear.
To stop playback: Press the
Direct track search
By using the numeric buttons, the desired tracks on the
current disc can be played.
Use the numeric buttons on the remote control to select
the desired track while playing the selected disc.
The numeric buttons allow you to select up to number 9.
When selecting number 10 or higher, use the "+10" button.
A. For example, to choose 13
1
Press the "+10" button.
2
Press the "1" and then "3"
button.
B. For example, to choose 130
1
Press the "+10" button twice.
2
Press the "1", "3" and "0" button.
Notes:
A track number higher than the number of tracks on the
disc cannot be selected.
During random play, direct search is not possible.
Repeat play
Repeat play can play all 5 discs, all tracks on a chosen
disc, single track on a chosen disc, or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button once. Press the
To repeat one disc:
Press the PLAY MODE button twice. Press the
) button.
To repeat all tracks on up to 5 discs:
Press the PLAY MODE button 3 times. Press the
) button.
To repeat desired tracks:
Perform steps 1 - 6 in "Programmed play" section on page
8 and then press the PLAY MODE button.
To cancel repeat play:
Press the PLAY MODE button again until "
Random play
The tracks on the disc(s) can be played in random order
automatically.
To random play all tracks on up to 5 discs:
Press the PLAY MODE button for 2 seconds on the remote
control and then press the
To cancel random play:
Press the PLAY MODE button.
"R" will disappear.
Notes:
If you press the
button during random play, you can
move to the next track by the random operation. On the
other hand, the
button does not allow you to move
to the previous track. The beginning of the track being
played will be located.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press
the
(CD
) button. Otherwise, the disc(s) will play
continuously.
(CD ) button.
Selected track number
button.
(CD
(CD
" disappear.
(CD
) button.
Programmed play
You can choose up to 32 selections for playback in the
order you like.
1
While in the stop mode, press the MEMORY button to
enter the programming save mode.
2
Press one of the
desired disc.
3
Press the numeric buttons on the remote control or
or
button to select the desired track.
4
Press the MEMORY button
to save the track number.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can
be programmed. If you want to check the programmed
tracks, press the MEMORY button repeatedly.
If you make a mistake, the programmed tracks can be
cleared by pressing the CLEAR button.
6
Press the
(CD
Programmed play (MP3/WMA)
1
While in the stop mode,
press
the
MEMORY
button
to
enter
programing save mode.
2
Press one of the
desired disc.
3
Press
the
PRESET
(
or
) button on the
remote control to select
the desired folder.
Then press the
button on the remote
control to select the
desired tracks.
4
Press the MEMORY button to save the folder and
track number.
5
Repeat steps 3 - 4 for other folder/tracks. Up to 32
tracks can be programmed.
6
Press the
(CD/USB
To cancel the programmed play mode:
During programmed stop mode, press the
button. The display will show "MEM CLEAR" and all the
programmed contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY"
indicator will be displayed.
Press the MEMORY button repeatedly to go to the last
program memory. Then follow steps 2 - 4 to add tracks.
The new tracks will be stored after the last track of the
previous program.
Notes:
When a disc is ejected, the program is automatically
canceled.
If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
During the program operation, random play is not
possible.
E-8
1 -
5 buttons to select the
) button to start playback.
the
1 -
5 buttons to select the
or
) button to start playback.
(CD
)