Sharp CD G14000 Посібник з експлуатації - Сторінка 38

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стереосистема Sharp CD G14000. Sharp CD G14000 48 сторінок. Mini component system

Timer and sleep operation (Remote Control only) (continued)

CD-G14000

When the preset time is reached, playback or recording

will start.

The volume will increase gradually until it reaches the preset

volume.

When the timer end time is reached, the system will enter

the power stand-by mode automatically.

Once timer:

The timer will be canceled.

Daily timer:

The timer will operate at the same time every day. It will

continue until the daily timer setting is canceled. Cancel the

daily timer when it is not used.

Note:

When performing timer playback or recording using another unit

connected to the AUDIO IN jacks, select "AUDIO IN" in step 9.

This unit will turn on or enter the power stand-by mode automatically,

however, the connected unit will not turn on or off.

Checking the timer setting in the timer stand-by mode:

1 Press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY button.

3 Within 10 seconds, press the

"ONCE CALL" or "DAILY CALL", and press the MEMORY button.

The unit returns to the timer stand-by mode after displaying the

settings in order.

Canceling the timer setting in the timer stand-by mode:

1 Press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY button.

3 Within 10 seconds, press the

"ONCE OFF" or "DAILY OFF", and press the MEMORY button.

Timer will be canceled (the setting will not be canceled).

Reusing the memorized timer setting:

The timer setting will be memorized once it is entered. To reuse the

same setting, perform the following operations.

1 Turn the power on and press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY button.

3 Within 10 seconds, press the

"ONCE ON" or "DAILY ON", and press the MEMORY button.

4 Press the ON/STAND-BY button to enter the power stand-by

mode.

button to select