Sharp CD-E250E Посібник з експлуатації - Сторінка 30

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стереосистема Sharp CD-E250E. Sharp CD-E250E 32 сторінки. Mini component system
Також для Sharp CD-E250E: Посібник з експлуатації (32 сторінок)

Sharp CD-E250E Посібник з експлуатації

Maintenance

CD-E250E
! Cleaning the tape-handling parts
" Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
" When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
TAPE 1
TAPE 2
Playback head
Capstan
Pinch roller
" After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
! Cleaning the CD pickup lens
Poor performance during CD playback (skipping or jumping) can be
caused by a dirty or contaminated CD laser pick up lens. If this hap-
pens then the use of a commercially available CD lens cleaning
discs may restore normal operation. Contact your supplier or local
CD software dealer to obtain CD lens cleaning discs. Ensure all
included instructions/documentation are carefully followed.
! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
30

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
B
A
C
Power source
Power
consumption
B
Dimensions
D
E
C
Weight
Erase head
Recording/Playback head
! Amplifier
Output power
Output terminals
Input terminals
03/2/17
AC 230 - 240 V, 50 Hz
78 W
Width: 270 mm (10-5/8")
Height: 305 mm (12")
Depth: 342 mm (13-1/2")
6.4 kg (14.1 lbs.)
Front speakers:
RMS: 46 W (23 W + 23 W) (10 % T.H.D.)
RMS: 33 W (16.5 W + 16.5 W) (0.9 %
T.H.D.)
Surround speakers:
RMS: 20 W (10 W + 10 W) (10 % T.H.D.)
RMS: 17 W (8.5 W + 8.5 W) (0.9 % T.H.D.)
Front speakers: 8 ohms
Surround speakers: 16 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
CD-E250E(E)3.fm