Sharp CD-ES770 Посібник з експлуатації - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стереосистема Sharp CD-ES770. Sharp CD-ES770 36 сторінок. Mini component system
Також для Sharp CD-ES770: Посібник із швидкого старту (2 сторінок), Посібник з експлуатації (14 сторінок), Посібник з експлуатації (14 сторінок), Посібник з експлуатації (14 сторінок)
Playback will begin from track 1 on the DISC 1. After that disc
finishes playing, the next disc will automatically play.
After the last track on the fifth disc is played, the CD player stops
automatically.
When there is no CD in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a CD.
To exchange other CDs while playing a disc:
Press one of the
1 -
5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
To remove the CDs:
In the stop mode, press the
1 -
press the OPEN/CLOSE button.
Caution:
Do not place two CDs in one disc tray.
Do not play discs of special shapes (heart, octagon, etc). It may
cause malfunctions.
Do not push the disc tray while it is moving.
If the power fails while the tray is open, wait until the power is
restored.
If the disc tray is stopped with force, "ER-CD20" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will be
skipped.
Auto power on function:
When you press any of the following buttons, the unit turns on.
CD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
/
button (main unit and remote control): The unit turns on
and playback of the last function starts (CD, TAPE, TUNER,
GAME/VIDEO).
5 button and within 5 seconds,
Various CD functions
Function
Main unit
Play
Stop
Pause
Track up/
Track down
Fast for-
ward/Fast
reverse
Notes:
Track up/track down and fast forward/fast reverse are possible
only within individual discs.
When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
Remote
Operation
control
Press in the stop
mode.
Press in the playback
mode.
Press in the playback
mode. Press the
button to resume play-
back from the paused
point.
Press in the playback
or stop mode.
If you press the button
in the stop mode,
press the
/
button
to start the desired
track.
Press and hold down
in the playback mode.
Release the button to
resume playback.
CD-ES770
/
17