Sharp CD-G15000 Посібник з експлуатації - Сторінка 34
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стереосистема Sharp CD-G15000. Sharp CD-G15000 48 сторінок. Speaker system
Також для Sharp CD-G15000: Посібник із швидкого старту (2 сторінок)
Друкувати сторінку
Listening to a cassette tape (TAPE 1 or
CD-G15000
CP-G15000
TAPE 2) (continued)
Various tape functions
Function
Main unit
Play
Stop
Fast
forward/
Fast rewind
(TAPE 2 only)
Caution:
To remove the cassette, press the
compartment.
Before changing from one tape operation to another, press the
button.
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
34
Remote
Operation
control
Press in the stop
mode.
Press in the playback,
fast forward or rewind
mode.
Press in the playback
or stop mode.
button, and then open the
Recording on a cassette tape
Before recording:
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
For recording, use only normal tapes. Do not use metal or
CrO tapes.
Recording can be operated in the TAPE 2 compartment only.
The TAPE 1 is for playback only.
Erase-prevention tab of cassette tapes:
When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape
without the tab.
Tab for side B
Side A
Tab for side A