Sharp CD-G20000 Посібник з експлуатації - Сторінка 33
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стереосистема Sharp CD-G20000. Sharp CD-G20000 48 сторінок. Speaker system
Також для Sharp CD-G20000: Посібник із швидкого старту (2 сторінок)
Друкувати сторінку
Listening to a cassette tape (TAPE 1 or TAPE 2)
Before playback:
For playback, use normal or low-noise tapes for the
best sound. (Metal or CrO
recommended.)
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
tapes are not
Auto power on function:
When you press any of the following buttons, the unit turns on.
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-
by mode after 15 minutes of inactivity.
Tape playback
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette com-
partment by pushing the
area marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment
with the side to be played
facing toward you.
4
Press the TAPE (1
2) button to select the cassette you
want to listen to.
5
Press the
/
(TAPE
)
to start playback.
TAPE (1
2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
TAPE
button on the remote control: The unit turns on and the
"TAPE" function is activated.
/
button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, GAME/VIDEO).
CD-G20000
CP-G20000S
TAPE 1
TAPE 2
Tape play indicator
33