Sharp CD-XP120W Посібник з експлуатації - Сторінка 23

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стереосистема Sharp CD-XP120W. Sharp CD-XP120W 32 сторінки.

Recording to a cassette tape

Before recording:

! When recording important selections, make a preliminary test to

ensure that the desired material is properly recorded.

! SHARP is not liable for damage or loss of your recording arising

from malfunction of this unit.

! The volume and sound controls can be adjusted with no effect on

the recorded signal (Variable Sound Monitor).

! For recording, use only normal tapes. Do not use metal or

CrO tapes.

Recording can be operated in the TAPE 1 compartment. The TAPE

2 is for playback only.

" Recording from a CD (CDs)

You can record 3 CDs continuously.

Press the ON/STAND-BY button to turn the power on.

Load a cassette into the TAPE 1 cassette compartment

with the side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be

performed.

Press the CD button and load the desired disc.

Press one of the

1 -

3 buttons on the remote control

to select the disc to be recorded first.

Press the

button of TAPE

1, which also engages the

button.

CD playback and tape recording will start.

To stop recording:

Press the

button of TAPE 1.

To perform programmed recording:

1 Press the CD button.

2 Programme discs and tracks. (See page 17.)

3 Press the

button of TAPE 1, which also engages the

02/5/27

CD-XP120W(A)3.fm

CD-XP120W

ENGLISH

button.

E-22