FiberHome HG6143D Посібник з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Мережеве обладнання FiberHome HG6143D. FiberHome HG6143D 19 сторінок.

Safety Precautions

For your correct and safe operations on the equipment, please carefully read and strictly observe

the following safety instructions:

◆ High optical power can cause bodily harm, especially to eyes. Never look directly into the

end of the optical transmitter fiber jumper or the end of its active connector.

◆ Exercise care if you must bend fibers. If bends are necessary, the fiber bending radius

should never be less than 38 mm.

◆ Overloaded power sockets or damaged cables and connectors may cause electric shock or

fire. Regularly check electrical cables. If any of them is damaged, replace it immediately.

◆ Use the power supply adapter provided in the package only. Using other adapters may

cause equipment damage or operation failures.

◆ Install the equipment in a well-ventilated environment without high temperature or direct

sunlight to protect the equipment and its components from overheating, which may result in

damage.

◆ Cut off the power supply for the equipment in lightning weather and disconnect all the wires

and cables (such as the power cable, network cable and phone cable) from the equipment,

so as to prevent the equipment from being damaged by lightning.

◆ Do not place the equipment in a wet or damp environment. Water seepage will lead to

abnormal operation of the equipment and short circuit, which may cause dangers and

should be prohibited. ◆ Do not lay this equipment on an unsteady base.

Contents

Safety Precautions..................................................................................................I

Documentation Guide .....................................................................................1