Sharp AL-1633 Онлайн-посібник - Сторінка 19

Переглянути онлайн або завантажити pdf Онлайн-посібник для Принтер "Все в одному Sharp AL-1633. Sharp AL-1633 32 сторінки. Digital multifunctional system
Також для Sharp AL-1633: Посібник з налаштування програмного забезпечення (20 сторінок)

Друкувати сторінку

SCAN

Scanning Overview

The flow chart shown below provides an overview of scanning.

The environment in which the machine's scanning function can be used is subject to certain limitations. For details, see "BEFORE

Caution

INSTALLATION" in the Software Setup Guide.

Scanning from a TWAIN*

or WIA*

-compliant application

Start up a Twain-compliant or

WIA-compliant application, and

select the machine's scanner

Scanning

☞

Scanning from a

TWAIN-Compliant

Scanning from a WIA-Compliant

Application (Windows XP)

*1 TWAIN is an international interface standard for scanners and other image acquisition devices. By installing a TWAIN driver on your computer, you can

scan and work with images using a variety of TWAIN-compliant applications.

*2 WIA (Windows Imaging Acquisition) is a Windows function that allows a scanner, digital camera or other imaging device to communicate with an image

processing application. The WIA driver for this machine can only be used in Windows XP.

*3 To scan using the machine's operation panel, you must first install Button Manager and establish the appropriate settings in the Control Panel. For

details, see "SETTING UP BUTTON MANAGER" in the Software Setup Guide.

CONTENTS

-compliant

Scanning from the "Scanner and

Camera Wizard" (Windows XP)

Place the original in the scanning position

☞

For more information, refer to "NORMAL COPYING" in the Operation Manual.

Start up the "Scanner and

Camera Wizard" from "Control

Panel" in your computer.

Set the scan preferences

☞

Scanning from the "Scanner and

Application,

Camera Wizard" (Windows XP)

I N D E X

Scanning

Using the machine to begin scanning*3

Change the machine to scanner

mode and press a scan menu key

(1 to 6).

Set the scan preferences

(only if the preferences are set to appear)

Scanning

☞

"USING THE SCANNER MODE"

in the Operation Manual,

Outline of Button Manager