Sharp AL-2050 Онлайн-посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Онлайн-посібник для Принтер "Все в одному Sharp AL-2050. Sharp AL-2050 41 сторінка.

Basic Printing

If the tray runs out of paper during printing

Printing will automatically resume when paper is loaded in the

tray.

When using the bypass tray, select printer mode with the mode

select key on the machine, load paper as instructed by the

message in the display, and then press the [START] key to

resume printing.

Cancel a print job

Select printer mode with the [MODE SELECT]

key on the operation panel of the machine, and

then press the [CLEAR] key (

ALL] key (

"CANCEL PRINT JOB?" will appear in the

display. Make sure that a checkmark appears in

front of "YES" and press the [ENTER] key.

When the machine is connected to your computer using

Caution

the USB 2.0 (Hi-Speed) ports on each, be sure to read

"System requirements for USB 2.0 (Hi-Speed mode)" in

the Operation Manual.

CO NT E N TS

) or the [CLEAR

I N D E X

When "Paper Source" is set to "Auto Select"

If "Paper Source" is set to "Auto Select" in the "Paper" tab of the

printer driver setup screen and the correct size of paper for a

print job is not loaded in the machine, the printing procedure

will vary depending on the "FORCED OUTPUT" setting in the

user programs (see "USER PROGRAMS" in the Operation

Manual).

When "FORCED OUTPUT" is set to "OFF"

Select printer mode with the mode select key on the machine,

check the message in the display, load paper in the bypass tray,

and then press the [START] key to begin printing.

When "FORCED OUTPUT" is set to "ON"

Printing takes place on the paper loaded in the machine, even

though the paper size is different from the print image size.

(part 2)