Sharp AR-5127 Посібник з експлуатації принтера - Сторінка 36
Переглянути онлайн або завантажити pdf Посібник з експлуатації принтера для Принтер "Все в одному Sharp AR-5127. Sharp AR-5127 39 сторінок.
Також для Sharp AR-5127: Посібник з експлуатації (17 сторінок)
Друкувати сторінку
LIST OF KEY OPERATOR PROGRAMS
A list of key operator programs for the printer feature is provided below. Factory default settings are indicated in boldface type.
The programs with the settings "On" and "Off" are set by pressing the OK key so that a check mark is displayed in the check box.
Program
EXPOSURE LEVEL
1 - 3 - 5
NOTICE PAGE
On / Off
ROTATED PRINT
On / Off
FORCED OUTPUT
On / Off
OF PRINT
AUTO TRAY
On / Off
SWITCH
TRAY EXCLUDED
NO / TRAY 1 /
FROM ATS
TRAY 2 / TRAY 3* /
TRAY 4*
EXCLUDE BYPASS-
On / Off
TRAY FROM ATS
DISABLE INTERRUPT
On / Off
PRINT JOB
I/O TIMEOUT
1 sec. - 180 sec. -
999 sec.
CONTENTS
Possible settings
Lightens or darkens printouts.
Specifies whether a notice page will be printed when specified printing
is not performed because of a problem such as IMC memory full error.
Enables/disables rotation of print image for printing onto A4R, B5R or
8-1/2" x 11"R paper.
Specifies whether printing onto another size paper determined by the priority
rule is performed when no tray with the specified size paper is installed.
Enables/disables automatic switching between paper trays containing the
same size paper in the same orientation during printing when paper runs out.
Specifies a tray which will not be used with the auto select setting for
paper source.
* The available settings reflect the installed trays.
Specifies whether the bypass tray is included in the trays selected with
the auto select setting for paper source.
Disables printing from being interrupted by another function if this
program is set.
In the event that data is not received, printing is ended after the set
time.
INDEX
KEY OPERATOR PROGRAMS
Description
TOP OF CHAPTER
36
36