Sharp AR-5127 Посібник з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Принтер "Все в одному Sharp AR-5127. Sharp AR-5127 17 сторінок.
Також для Sharp AR-5127: Посібник з експлуатації принтера (39 сторінок)
Друкувати сторінку
Operation when an error occurs
Error table
When an error occurs during a job, the error immediately appears in the display. The job is
interrupted if the error affects the job; otherwise, the job continues. In the case of a walkup job, if
the error does not affect the job, the error message appears after the job is completed.
If an error occurs that requires a service call, the machine stops immediately and an error code
appears.
Errors and operation
When an error occurs, many jobs become impossible; therefore, the error should be cleared as
soon as possible.
Misfeed in machine
The display shows "Clear paper path."
The mode cannot be changed until the error is cleared.
●
The JOB STATUS key can be used.
●
Memory scanning is possible.
●
Data transmission is possible.
●
Notes
When the error is cleared, the job that was in progress before the error occurred resumes.
●
A fax or scan job that is being scanned or that is stored will be executed, but new
●
scanning cannot be started.
Misfeed in RSPF
The display shows "Clear paper path."
The mode cannot be changed until the error is cleared.
●
The JOB STATUS key can be used.
●
Memory scanning is possible.
●
Data transmission is possible.
●
Print and fax print jobs are possible.
●
Notes
When the error is cleared, the job that was in progress before the error occurred resumes.
●
The display shows the number of original pages that need to be reloaded. Reload those
pages and press the START key.
If a print job or fax print job is in progress, printing continues. Subsequent print jobs can
●
also be started.
Open machine cover
A message appears in the display prompting you to close the cover.
Operation in this case is the same as "Misfeed in machine".
●
Open RSPF cover
When a job is set up that uses the RSPF, a message appears in the display prompting you to close
the cover.
Any job that does not use the RSPF is possible.
●
Downloaded from:
http://www.usersmanualguide.com/
10