ABOUT THE NETWORK SCANNER FUNCTION
The AR-NS2 Network Scanner Expansion Kit adds network scanner functionality to your machine. A machine with
the network scanner functionality can scan a paper document, photograph, or other printed information into a data
file, and send the file to a file server or personal computer over a corporate network (intranet) or the Internet.
You can select from the following three transmission methods, depending on where you wish to send the scanned
image data.
TABLE OF CONTENTS
1. The scanned information can be sent to a
memory storage device on a network (a
designated directory on an FTP server).
(Hereafter referred to as "Scan to FTP" in this
manual.)
When sending scanned information to an FTP
server, an e-mail message can also be sent to
a preset e-mail address to inform the recipient
of the location of the scanned image data.
(Hereafter referred to as "Scan to FTP
(Hyperlink)" in this manual.)
2. The scanned information can be sent to one's
own personal desktop. (Hereafter referred to
as "Scan to Desktop" in this manual.)
* Before Scan to Desktop can be performed, the
"Network Scanner Tool" software in the CD-
ROM that accompanied the Network Scanner
Expansion Kit (AR-NS2) must be installed.
(Refer to
"Storing destinations for Scan to
Desktop" (page 9).)
3. The scanned information can be sent to an e-
mail recipient. (Hereafter referred to as "Scan
to E-mail" in this manual.)
* There are limitations to the use of Scan to E-
mail. A limit has been set in the "Maximum
size of e-mail attachments" of the key
operator program for the maximum amount
of data that can be sent using Scan to E-mail
(page
38)
3