Sharp AR-M350 Imager Посібник з експлуатації - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Принтер "Все в одному Sharp AR-M350 Imager. Sharp AR-M350 Imager 32 сторінки. Ar-m280 | ar-m350 | ar-m450 operation manual (for network scanning)
Також для Sharp AR-M350 Imager: Брошура та технічні характеристики (11 сторінок), Посібник з експлуатації (30 сторінок), Посібник із заправки (8 сторінок), Посібник з експлуатації (40 сторінок)
Друкувати сторінку
PRIORITY TRANSMISSION OF A STORED JOB
If you have an urgent transmission job and multiple transmission jobs have already been stored, you can give priority
to the urgent job so that it will be transmitted immediately after the job currently being executed. This is done from the
job status screen. For details on using the job status screen, refer to page 1-14 of "Operation manual (for printer
operation and general information)".
1
Press the JOB STATUS key.
2
Touch the E-MAIL/FTP key.
WAITING
WAITING
WAITING
E-MAIL/FTP
CANCELING AN E-MAIL/FTP TRANSMISSION
You can cancel a transmission job that is in progress or that has been stored. Cancellation is done from the e-mail/
FTP job status screen.
1
Press the JOB STATUS key.
2
Touch the E-MAIL/FTP key.
WAITING
WAITING
WAITING
E-MAIL/FTP
16
3
Touch the job key of the transmission job to
which you wish to give priority.
The touched key is highlighted.
4
Touch the PRIORITY key.
AITING
AITING
PRIORITY
AITING
STOP/DELETE
When the current job is completed, execution begins of
the job selected in step 3.
NOTE
If the job currently being executed is a broadcast
transmission, the priority job will be executed after the call
to the current destination is completed. When the priority
job is completed, the remaining broadcast destinations are
called. However, if the priority job is also a broadcast
transmission, the job is begun after the current broadcast
job is completed.
3
Touch the job key of the transmission job you
wish to cancel.
The touched key is highlighted.
4
Touch the STOP/DELETE key.
AITING
AITING
PRIORITY
AITING
STOP/DELETE
NOTE
If you do not wish to cancel the transmission, touch the
NO key.
The selected job moves up
to the next position after the
job
currently
being
executed.
A message appears to
confirm the cancellation.
Touch the YES key to delete
the selected job key and
cancel the transmission.