Sharp AR-NB3 Робота мережевого сканера - Сторінка 36

Переглянути онлайн або завантажити pdf Робота мережевого сканера для Принтер "Все в одному Sharp AR-NB3. Sharp AR-NB3 40 сторінок. Digital copier/printer/multifunctional system option
Також для Sharp AR-NB3: Посібник з друку (41 сторінок), Посібник з опцій (44 сторінок)

Друкувати сторінку

MAXIMUM RESOLUTION

When scanning takes place with the resolution set to the maximum resolution (600 dpi), the resolution may change

depending on the amount of memory available, the original size, the colour mode, and other scanning conditions. The

table below shows the relation between the possible scanning area and the scanning conditions. (Note that the following

examples are for standard memory in the machine and 128 MB or more of memory in the network expansion kit.)

Models without the two-sided printing function

Colour

150

200

A4, A4R

B5, B5R

300

A5, A5R

11" x 17"

150

8-1/2" x 14"

8-1/2" x 13"

200

8-1/2" x 11"

8-1/2" x 11"R

5-1/2" x 8-1/2"

300

5-1/2" x 8-1/2"R

: Scanning is possible at the maximum resolution (600 dpi).

DISPLAY MESSAGES

If a transmission error occurs when you send a scanned image, a message informing you of the error and an error

code will appear in the display on the machine.

Error Code

Turn off the power and then turn it back on. Consult with your network administrator to

CE-00

make sure that no problems exist on the network or in the server. If the error is not

CE-01

cleared after turning the power off and on, turn off the power and contact your dealer.

The scanned image was not sent because a connection to the server could not be

established. Make sure that the SMTP server settings or Scan to FTP destination

settings in the Web page are correct.

CE-02

The procedure for configuring the SMTP server is explained in

CE-04

SETTINGS", and the procedure for editing Scan to FTP destination information is

explained in

information on the settings to be entered, see Help in the Web page.

The scanned image was not sent because the server was busy or there was too much

CE-03

traffic on line. Wait briefly and then try again.

The scanned image was not sent because the directory of the destination FTP server was not

CE-05

correct. Make sure that the correct FTP server information is configured in the Web page.

The size of the scanned image file exceeds the limit set in "Maximum Size of E-mail

CE-09

attachments" in the Web page. Reduce the number of original pages scanned into the

file, or change the limit set in "Maximum Size of E-mail attachments".

The memory became full during scanning. Scan less pages, lower the resolution, or

CE-11

change the colour mode so that the file size is smaller, and try scanning again.

The maximum number of destinations of a global address search has been exceeded.

CE-12

Increase the number of search characters to narrow the range of the global address search.

IF YOUR E-MAIL IS RETURNED

If a Scan to E-mail transmission is not successful, an e-mail informing you of this fact is sent to the return address configured

in the SMTP server. If this happens, read the e-mail and determine the cause of the error, and then repeat the transmission.

Grey

300

400

300

400

"Editing and deleting programmed transmission

Models with the two-sided printing function

B/W

Colour

200

300

400

300

400

Solution

"VARIOUS SERVER

destinations". For

TROUBLESHOOTING

(dpi)

Grey

B/W

300

400

300

400

Page

–

10,

–

27,