Sharp MX-M904 Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Принтер "Все в одному Sharp MX-M904. Sharp MX-M904 16 сторінок. Digital multifunctional system
Також для Sharp MX-M904: Брошура та технічні характеристики (2 сторінок), Брошура та технічні характеристики (12 сторінок), Брошура та технічні характеристики (13 сторінок), Посібник з монтажу (19 сторінок)

Criteria

(g) If the telecommunications product allows a user to adjust

the receive volume, a function shall be provided to

automatically reset the volume to the default level after every

use.

(h) Where a telecommunications product delivers output by

an audio transducer which is normally held up to the ear, a

means for effective magnetic wireless coupling to hearing

technologies shall be provided.

(i) Interference to hearing technologies (including hearing

aids, cochlear implants, and assistive listening devices) shall

be reduced to the lowest possible level that allows a user of

hearing technologies to utilize the telecommunications

product.

(j) Products that transmit or conduct information or

communication, shall pass through cross‐manufacturer, non‐

proprietary, industry‐standard codes, translation protocols,

formats or other information necessary to provide the

information or communication in a usable format.

Technologies which use encoding, signal compression, format

transformation, or similar techniques shall not remove

information needed for access or shall restore it upon

delivery.

(k)(1) Products which have mechanically operated controls or

keys shall comply with the following: Controls and Keys shall

be tactilely discernible without activating the controls or keys.

(k)(2) Products which have mechanically operated controls or

keys shall comply with the following: Controls and Keys shall

be operable with one hand and shall not require tight

grasping, pinching, twisting of the wrist. The force required to

activate controls and keys shall be 5 lbs. (22.2N) maximum.

(k)(3) Products which have mechanically operated controls or

keys shall comply with the following: If key repeat is

supported, the delay before repeat shall be adjustable to at

least 2 seconds. Key repeat rate shall be adjustable to 2

seconds per character.

(k)(4) Products which have mechanically operated controls or

keys shall comply with the following: The status of all locking

or toggle controls or keys shall be visually discernible, and

discernible either through touch or sound.

Return to the top of the page.

Supporting Features

Not Applicable