Sharp SJ-X44T Посібник з експлуатації - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Холодильник Sharp SJ-X44T. Sharp SJ-X44T 20 сторінок.
Друкувати сторінку
Controlling Temperature
The refrigerator controls its temperature automatically. However, you can adjust the temperature in 5 levels.
How to check the current
temperature level
The indicator will be "ON " to show the current temperature
level by pressing "R" or "F" button.
Refrigerator compartment
Freezer compartment
Setting of Refrigerator / Freezer
compartment
Refrigerator compartment
1.
Press "R" button.
2.
Press "R" button to change the temperature level.
Freezer compartment
1.
Press "F" button.
2.
Press "F" button to change the temperature level.
Advanced Setting of Refrigerator / Freezer
compartment
The temperature of refrigerator compartment and freezer compartment
can be adjusted in 9 levels (level 1 ~ 9) by following steps.
Refrigerator compartment
1.
Press "R" button fi rst. Hold down "R" button and then press
"Express freezing" button for 3 seconds or more.
The indicator will return to "Factory setting".
2.
Press "R" button to change the temperature level.
Follow step 1 again if you want to adjust the temperature in 5 levels.
Freezer compartment
1.
Press "F" button fi rst. Hold down "F" button and then press
"Express freezing" button for 3 seconds or more.
The indicator will return to "Factory setting".
2.
Press "F" button to change the temperature level.
Follow step 1 again if you want to adjust the temperature in 5 levels.
16
SJ-XP400PG_EN.indd Sec1:16
SJ-XP400PG_EN.indd Sec1:16
: Press "R" button.
: Press "F" button.
Beep
Beep
Beep beep beep
Beep beep beep
●
Temperature indicator changes as the pictures below
(3→4→5→1→2→3) in each case (Refrigerator compartment
/ Freezer compartment) by pressing "R" or "F" button.
Level
1
2
3
<Factory setting>
4
5
NOTE
At fi rst, both compartments are set at "Factory setting".
●
After adjusting the temperature level, the indicator will turn
●
off approximately 5 seconds later.
When the operation of refrigerator stops because of power
●
failure, temperature setting is restarted from the previous
setting at the time of re-power.
●
Temperature indicator changes as the pictures
below (5→6→7→8→9→1→2→3→4→5)
in each case (Refrigerator compartment /
Freezer compartment) by pressing "R" or "F"
button.
...
...
OFF
Level
1
2
3
4
5
<Factory setting>
6
7
8
9
Indicator
...
Lighting
Flashing
Indicator
27/11/2014 13:37:40
27/11/2014 13:37:40