FiberLabs EDFA-1550 Series Технічний паспорт - Сторінка 3
Переглянути онлайн або завантажити pdf Технічний паспорт для Підсилювач FiberLabs EDFA-1550 Series. FiberLabs EDFA-1550 Series 20 сторінок. 1550nm optical amplifier
Друкувати сторінкуTechnical passport / EDFA-1550
This manual applies to EDFA-1550 series Fiber Amplifiers. It mainly describes the performance
characteristics, technical parameters, installation and debugging, common troubleshooting, and other
related content of the product. In order to ensure that the equipment can be successfully installed and
safely operated, please read this manual carefully before installing and debugging the equipment. And the
installation and debugging should be strictly according to the specified steps on the manual to avoid
unnecessary damage to equipment or accident harm to the operator. Any questions, please contact with us
in time.
Special Tips:
1）Er-doped Fiber Amplifier is high end professional equipment, and its installation and debugging must
be operated by special technician. Read this manual carefully before operating to avoid damage to
equipment caused by fault operation or accident harm to the operator.
2）While the fiber amplifier is working, there is an invisible laser beam from the optical output adapter
on the front panel. Avoiding permanent harm to the body and eye, the optical output should not aim at
the human body and human should not look directly at the optical output with the naked eye!
3）Please make sure that the ground terminal of the case and power outlet has been reliably grounding
before turning on the power (Grounding resistance should be < 4Ω) to prevent the static damage the
pump laser device and harm to human because of case charged.
4）To ensure the equipment can work stable over a long time in voltage unsteady or poor voltage wave
region, it´s recommend to the customer that he equips special AC regulated power supply, or even AC
uninterrupted power supply (UPS) system for conditional regions. In the region with large
temperature variation environment (The equipment's ideal work environment temperature is 25°C) or
bad room environment it´s recommend to the customer that he equips special air-condition system to
improve the work environment.
EDFA-1550 series 1550nm optical fiber amplifier is the important optical relay transmission equipment in
1550nm optical fiber communication system. It mainly used for the long distance optical fiber
transmission of TV image signal, digital television signal, telephone voice signal and data (or compressed
data) signal. This product uses the high-performance erbium doped fiber and low noise pump laser, and
built-in perfect embedded automatic monitoring system, to ensure the excellent performance indicators.
Foreword
1. Product Summary
3
12-2016-v4