Sharp Conference Series XG-PH80W-N Посібник з налаштування - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник з налаштування для Проектор Sharp Conference Series XG-PH80W-N. Sharp Conference Series XG-PH80W-N 32 сторінки. Projectors
Також для Sharp Conference Series XG-PH80W-N: Брошура та технічні характеристики (4 сторінок), Технічна специфікація (4 сторінок), Технічні характеристики (2 сторінок)

Setting up the Projector Network Environment

This section describes the basic procedure for using the projector via the network.

If the network is already constructed, the projector's network settings may need to be

changed. Please consult your network administrator for assistance with these settings.

You can make network settings both on the projector and on the computer. The following

procedure is for making settings on the computer.

Network settings on the computer

1. Connecting the projector to a computer

Connect a LAN cable (Category 5, cross-over type) between the computer and projector.

2. Setting an IP address for the computer

Adjust the IP settings of the computer to enable one-to-one communications with the projector.

3. Setting up a network connection for the projector

Adjust the projector network settings to conform to your network.

•

Microsoft

, Windows

United States and/or other countries.

•

PJLink is a registered trademark or an application trademark in Japan, the United States, Canada, E.U.,

China and/or other countries/regions.

•

All other company or product names are trademarks or registered trademarks of their respective

companies.

-18

LAN cable

(commercially available)

and Windows Vista

are registered trademarks of Microsoft Corporation in the

Page 19

Temporarily change

the computer's IP

address.

Pages 20, 21

Use Internet Explorer

(version 6.0 or later)

to make various

projector settings.

Pages 22, 23