Sharp Notevision XG-C435X-L Посібник з налаштування - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з налаштування для Проектор Sharp Notevision XG-C435X-L. Sharp Notevision XG-C435X-L 46 сторінок. 4000 ansi lumens conference series projector
Також для Sharp Notevision XG-C435X-L: Технічна специфікація (2 сторінок), Технічні характеристики (2 сторінок)

Друкувати сторінку

Changing the Lens

Info

• Before changing the lens, turn off the power of the projector and remove the power cord from the wall

outlet.

• Do not attempt to change the lens while the projector is mounted on the ceiling.

Remove the lens housing cover

by using the supplied lens hous-

ing cover removal tool to push

down on the groove on the lens

housing cover.

• Hold down the lens housing cover with

your hand to prevent it from flying out.

Slide the lens fastener catch tab

in the direction of "UNLOCK"

while holding the lens to prevent

it from falling out.

• Slide the lens fastener catch tab until the

window located beside "LOCK" comes to

the top. Look inside the window to make

sure that the two grooves on the lens fas-

tener ring are facing up.

Remove the lens by pulling it

straight out.

Remove the protection cap from

the back of the new lens.

Lens fastener catch tab

Two grooves

Window

-9