Sharp PG-D3750W - WXGA DLP Projector 720p Посібник з налаштування - Сторінка 31
Переглянути онлайн або завантажити pdf Посібник з налаштування для Проектор Sharp PG-D3750W - WXGA DLP Projector 720p. Sharp PG-D3750W - WXGA DLP Projector 720p 35 сторінок. True xga/wxga data projectors
Також для Sharp PG-D3750W - WXGA DLP Projector 720p: Технічна специфікація (2 сторінок), Технічна специфікація (1 сторінок), Технічні характеристики (2 сторінок)
Друкувати сторінку
Resetting the Lamp Timer of the Projector via LAN
When the projector is connected to a network, you can use the communications program
to send a command to reset the lamp timer. The example below uses Windows
operating system. When you use Windows Vista
referring to the following steps, because Windows Vista
HyperTerminal.
1
1
Click "Start" – "All Programs" –
"Accessories" – "Communica-
tions" – "HyperTerminal".
•
If you do not have HyperTerminal installed,
see the operation manual of your computer.
•
Depending on the settings of your computer,
you may be required to enter your area code
and other details. Enter the information as
required.
2
2
Enter a name in the "Name" fi eld,
and click "OK".
3
3
If you are required to enter the
area code, enter it in the "Area
code" fi eld. From the "Connect
using" drop-down menu, select
"TCP/IP (Winsock)", and click
"OK".
4
4
Enter the IP address of the
projector in the "Host address"
fi eld (see "TCP/IP" on the
"Network" menu of the projector),
and enter the data port of the
projector in the "Port number"
fi eld ("10002" is the factory default
setting), and click "OK".
®
, use other communications program
®
does not come with
®
XP as the
Select
Select
"TCP/IP (Winsock)"
"TCP/IP (Winsock)"
-31