AccuTherm ACCSL2021 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Аксесуари AccuTherm ACCSL2021. AccuTherm ACCSL2021 12 сторінок.
Також для AccuTherm ACCSL2021: Посібник (15 сторінок)

Друкувати сторінку
AccuTherm ACCSL2021 Посібник
SmartLOG Options cont..
TEST MESSAGE Button: Will send an Email and/or SMS to recipients in contact list. Received message will show...
e.g. 5:52pm 3/15/2022 Test Message Host Name: HTTP://PED-Lab/ IP: HTTP://192.168.1.1344
Clicking desired link will open Dashboard in a browser.
1. Tap TEST MESSAGE button.
2. Tap YES in Confirm pop-up window to send an Email and SMS message.
If you tap NO the pop-up will close and you will be sent back to main screen automatically.
3. A Confirm pop-up window will say Sent Email and Sent Text if no issues. Tap Close to return to main screen.
Other responces... No WiFi: SmartLOG not connected to network, Email Not Confg: Missing info in dashboard settings
page under Email From Acct Info. Email Error or Text Error: Messages were rejected by email provider for some
reason.
4.
5.
RESET MIN/MAX Button: Sets memory recorded Min and Max values to current tempeature, time and date and
removes alert and alarm colors from display if excursion was triggered.
1. Tap RESET MIN/MAX button.
2. Tap YES in Confirm pop-up window to reset values. Wait for button to transition as Email/SMS alerts are being sent out.
Pop-up will close and switch back to the main screen automatically.
If you tap NO the pop-up will close and will be sent back to main screen automatically.
UPDATE CHECK Button: Checks online for firmware version against current SmartLOG version, if newer version is
available online, user has option to update. NOTE: Only recommended if having an issues.
1. Tap UPDATE CHECK.
2. Tap YES in Confirm pop-up window to download and install firmware.
If you tap NO the pop-up will close and will be sent back to main screen automatically.
Other responces... No WiFi: SmartLOG not connected to network, No Updates: SmartLOG is up to date.
3. Tap Restart to re-boot SmartLOG with new firmware.