DIGITAL AGILE SKYMOD1 Інструкція з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Модулятор DIGITAL AGILE SKYMOD1. DIGITAL AGILE SKYMOD1 2 сторінки. Audio/video modulator

Друкувати сторінку
Note:
1.
While doing the channel selection process, if power goes off, the "last channel" memory will
malfunction even though LED will be flashing.
2.
The SKYMOD1 output channel has been factory preset for UHF channels 14 thru 78.
3.
To change output channel range to CATV 65-135: Disconnect power, and then depress the ?
button. Reconnect the power and 01 will appear. Release the ? button and disconnect the power,
Reconnect the power and you are ready to channel select.
4.
To change output channel range to UHF 14-39 and CATV 91-135: Disconnect power, and then
depress the ? button. Reconnect the power and 02 will appear, Release the ? button and
disconnect the power. Reconnect the power and you are ready to channel select.
5.
To change output channel range to UHF 21-69: Disconnect power, and then depress both the ?
and ? buttons. Reconnect the power and 03 will appear. Release the ? and ? buttons and
disconnect power. Reconnect the power and you are ready to channel select.
6.
To change output channel range to factory UHF 14-78: Disconnect power, and then depress the
SELECT button. Reconnect the power and 00 will appear. Release the SELECT button and
disconnect power. Reconnect the power and you are ready to channel select.
SKYMOD1 Audio/Video Modulator Specifications
Output Frequency Range
Output Channels
Video Frequency Response
Aural Intercarriers Stability
Video Input IMP/RF Output IMP
Audio Input IMP
Frequency Accuracy/Stability
Video Input Level
Audio THD
Output Level
Video MOD Index
Dual Sideband
Audio/Visual Carrier Ratio
Size
Weight
Power Requirement
470-860 MHZ
UHF: Ch. 14-78, CATV Ultra Ch. 65-135
+/- 1db
4.5 MHz w/n +/- 3KHz
75 Ohm
>10K Ohm
PLL Crystal Stabilized +/-5KHz
1Vp-p
0.4%
10 dBmV
70% +/-10%
-15dB
95Lx75Wx26H m/m (3 3/4Lx3Wx1H inches)
4 oz.
110-120 VAC/60Hz