Digital Alert Systems R198 Інструкція з експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Перемикач Digital Alert Systems R198. Digital Alert Systems R198 13 сторінок. 4 unit aes switch

Друкувати сторінку

Password Settings

– The R198 allows you to program a Setup and a Control password.

The unit is defaulted with a Setup password of "monroe", and the Operation password is

disabled. If changes are made to either the Setup or the Operation password, you must click

on the "Submit" button to store the change. Passwords may be up to 10 characters in length.

If the passwords are forgotten, the R198 can be set back to factory defaults by removing the

power from the unit, pressing and holding the Reset button on the back of the unit, and recon-

necting the power to the unit.while keeping the button depressed. After approximately 10

seconds you can release the Reset button and the unit will be reset to the default password of

"monroe" for the Setup and no password for the Control. Caution: Pressing the reset switch

will reset ALL user settings back to default. This includes network IP address and associated

settings.