DIGITAL ALLTEK WI-CONNECT PRO Посібник зі встановлення та швидкого початку роботи - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник зі встановлення та швидкого початку роботи для Антена DIGITAL ALLTEK WI-CONNECT PRO. DIGITAL ALLTEK WI-CONNECT PRO 8 сторінок. Wireless adaptor/antenna
Друкувати сторінкуDIGITAL ALLTEK
4. Installing the WI-CONNECT PRO on Windows
The WI-CONNECT PRO is supplied with Windows compatible drivers that allow it to be used as a second Wireless
Network Adaptor on your laptop. You can either; install the drivers and use the normal Windows Wireless Connection
function to scan, select and connect to a wireless hotspot or you can use the free Realtek Wireless Lan Utility software
which is also supplied on the Memory Stick.
It is very important that you do not plug the WI-CONNECT PRO in to a USB port on your computer unless you have the
WI-CONNECT PRO Drivers Memory Stick inserted in your PC. By plugging in the WI-CONNECT PRO you will initiate the
Windows "Found New Hardware Wizard" which will not be able to complete correctly without the Drivers on the Memory
Stick being present. The installation process varies depending upon which Operating System your computer has, so
please ensure that you follow the correct procedure.
Installation for Windows Vista and Windows 7 (On-Line)
By far the easiest method of installation, if your PC is running
Windows Vista or Windows 7, is to connect the PC to the internet, as
you would normally do, using the internal wireless adaptor and then
plug the WI-CONNECT PRO in to a spare USB port on the laptop.
Windows will detect the new hardware and display the message
shown in Figure 1. It will then automatically search the on-line
Windows Update server for the correct drivers. Depending upon the
speed of your PC and internet connection this should take between 20
seconds and a couple of minutes to complete.
You can click on the message and the Window in Figure 2 will be
displayed giving you the status of the driver installation.
After the correct driver has been found, downloaded and installed the
Window in Figure 3 should be displayed. The drivers are now installed
correctly and you are ready to use the WI-CONNECT PRO to find and
connect to a wireless hotspot. Proceed to the "Operating WI-
CONNECT PRO on Windows Vista and Windows 7" section.
Installation for Windows XP, Vista and Windows 7 (Off-Line)
If you cannot connect to the internet, you can
install the drivers from the supplied Digital
Yacht Memory Stick.
Insert the Memory Stick in to the PC. Using
Windows Explorer, browse the memory stick
and run the Setup.Exe file as shown in Fig 4.
You should now see the Realtek Installation
program shown in Fig 5. Click the "Next"
button and the driver installation should start.
WI-CONNECT PRO PRO Quick Start Guide
Figure 1
Figure 2
Figure 3
Figure 4