Shimano ALFINE Inter-11 Посібник дилера - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник дилера для Аксесуари для велосипедів Shimano ALFINE Inter-11. Shimano ALFINE Inter-11 49 сторінок.
Друкувати сторінку
TO ENSURE SAFETY
• If the chain keeps skipping during use, replace the chainrings, sprockets, and the chain.
• If using a chain tensioner, use the special CS-S500 18T or 20T sprocket with chain guard. Do not use any other types of sprockets, otherwise the chain
may come off the sprockets.
< SG-S7001-11 >
• When you perform oil maintenance, use the SG-S700 OIL or TL-S703 maintenance kit.
When you replace the oil, follow the manual for TL-S703. When you replace the seal on the right side, use TL-S704.
If SG-S700 OIL is not used, problems such as an oil leakage and gear shifting malfunction may occur.
< CT-S500 / CT-S510 >
• Clean the chain tensioner periodically and lubricate all moving parts and pulleys.
• If there is a large amount of play in the pulleys and an abnormal amount of noise is generated while riding, replace the pulleys.
• Do not disassemble the pulley unit.
• If the tension applied is too strong, noise may be generated while riding.
• If the chain becomes elongated and excessive looseness occurs, readjust the chain tension.
< CT-S510 >
Applicable hubs
Internal 7-speed / 8-speed
• This product is for single front chainrings only.
The actual product may differ from the illustration because this manual is intended chiefly to explain the procedures for using
the product.
Applicable sprockets
Supported dropout thickness
16 - 23T
4 - 9 mm
8
Supported dropout shape
Vertical