Shimano CLARIS ST-R2000 Посібник дилера - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник дилера для Аксесуари для велосипедів Shimano CLARIS ST-R2000. Shimano CLARIS ST-R2000 48 сторінок. Shifting lever
Друкувати сторінку
INSTALLATION
Installation of the brake cable
Installation of the brake cable
Be careful not let the BC-9000/BC-R680 inner cable come into contact with the shifting lever or the metal section (adjustment section) of the caliper
brake. When the inner cable is installed, coating may be damaged and become fluffy; however, it will not affect function.
Use a cable which still has some length to spare even when the handlebars are turned all the way to both sides.
Cable used
Inner cable
Ø1.6mm
(A)
(B)
1
(A)
2
(A)
(A)
Depress the lever as if to brake and pass
(C)
the brake cable through.
Temporarily secure the outer casing to
(A)
the handlebar (by using tape or a similar
material).
(B)
NOTE
Outer casing
Ø5mm
12
TECH TIPS
For information on how to install the brake
cable, refer to the dealer's manual for the
brake.
(A)
Inner end
(B)
Cable hook
(C)
Outer casing
NOTE
Make sure that the inner end is firmly set in
the cable hook.
Cable hook
Inner end
(A)
Tape
(B)
Outer casing