Shimano TIAGRA BR-4400 Інструкція з обслуговування - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з обслуговування для Аксесуари для велосипедів Shimano TIAGRA BR-4400. Shimano TIAGRA BR-4400 3 сторінки. Caliper brake
Друкувати сторінку3.
Temporarily secure the outer casing to the handlebar
(by using tape or similar material).
Outer casing
4.
Then wrap the handlebar with handlebar tape.
Note:
Cut the cable at the length at which it is not pulled
tight when the handlebar is turned all the way to
the left and right.
If a squeaking noise occurs after a long period of
use, lubricate the
A
parts.
Tape
A
A
Installation of the brake
1.
Installation of the brake itself
Compress the arch‚ and set while the shoe is in firm
contact with the rim.
Tightening torque:
8 – 10 Nm
{69 – 87 in. lbs.}
5 mm Allen key
2.
Brake shoe setting position
FOR
WARD
5 mm Allen key
Tightening torque:
5 – 7 Nm
{43 – 61 in. lbs.}
The usual position
during installation is
when the head of the
centering adjustment
bolt is as shown in the
illustration.
1 mm or more
FOR
WARD
Direction of
rim rotation