Shimano GRX RD-RX812 Посібник дилера - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник дилера для Велосипед Shimano GRX RD-RX812. Shimano GRX RD-RX812 37 сторінок.

TO ENSURE SAFETY

• For maximum performance we highly recommend SHIMANO lubricants and maintenance

products.

For installation to the bicycle, and maintenance:

• Depending on the shape of the frame, the rear derailleur may interfere with the

chainstay. Use the B-screw to adjust so that the rear derailleur does not interfere with

the chainstay.

• Grease with SIS SP41 grease (Y04180000) the inner cable and the sliding portions of the

outer casing before use to ensure that they slide properly. Do not let dust adhere to the

inner cable.

• To ensure smooth operation, use OT-RS900 outer casing for rear derailleur and a cable

guide.

• Use an outer casing which still has some length to spare even when the handlebars are

turned all the way to either side. Furthermore, check that the shifting lever does not

touch the bicycle frame when the handlebars are turned all the way.

• The end of the outer casing which has the sealed outer cap (aluminum type) should be

on the shifting unit side. Refer to the ST-RX810 dealer's manual for details.

• If gear shifting adjustments cannot be carried out, check the alignment of the dropout

and check if the cable is lubricated or if the outer casing is too long or too short.

• Periodically clean the shifting unit and lubricate all moving parts (mechanism and

pulleys).

• If you hear abnormal noise as a result of excess play in a pulley, you should replace the

pulley.

The actual product may differ from the illustration because this manual is

intended mainly to explain the procedures for using the product.

Shifting unit side

Sealed outer cap

(aluminum type)

Cap with long tongue