Shimano Ultegra 6770 Series Посібники - Сторінка 17

Переглянути онлайн або завантажити pdf Посібники для Велосипед Shimano Ultegra 6770 Series. Shimano Ultegra 6770 Series 24 сторінки.

Installation of the battery mount

Set the electric wire for the battery mount into the groove in the electric wire cover for the battery mount.

Place the accessory spacers in between the battery mount and the frame and then secure them by tightening the bolts.

* If installing the bottle cage, it is easier to install it at this stage.

* Refer to the Service Instructions for the bottle cage for details on the tightening torques.

Use the accessory cable tie to secure the battery mount to the frame.

Spacers

2mm Allen key

Cable tie

* If there is a mounting boss on the frame, the

battery mount can be secured to the frame with

a bolt.

Battery mount fixing bolt

(M4 x 15mm)

Tightening torque:

1.2 - 1.5 N·m {10.4 - 13 in. lbs.}

Installation of the grommets

Install grommets in appropriate positions for the electric wires by inserting the bottoms into the holes in the frame and then

pushing the tops to fit them into place.

At junction (A)

Closed

Open

$ Installation of the bottle cage adapter

If the bottle cage which is installed to the seat tube

interferes with the battery, move the position of the bottle

cage upward. The installation position for the bottle cage

can be moved upward by a minimum of 32 mm and a

maximum of 50 mm from the original installation position.

* If it interferes with the mounting boss for the front

derailleur, use the accessory spacer.

* Refer to the Service Instructions for the bottle cage for

details on the tightening torques.

At rear derailleur

At front derailleur

3mm Allen key

Spacers

Tightening torque:

3 N·m {26 in. lbs.}