Shimano E6000 Series Посібник користувача - Сторінка 45
Переглянути онлайн або завантажити pdf Посібник користувача для Скутер Shimano E6000 Series. Shimano E6000 Series 47 сторінок. Total electric power system
Також для Shimano E6000 Series: Посібник користувача (38 сторінок)
Symptom
The gear position is not
displayed.
Can the beep be turned off.
Can the backlight be turned
off.
The setting menu cannot be
launched while riding the
bicycle.
Other
Symptom
When pressing the switch,
two beeps sound, and the
switch cannot be operated.
Three beeps sound.
When using a electronic gear
shifting mode, I feel that the
level of assistance weakens
when the gears shift.
Sound occurs after gear
shifting.
A noise can be heard from
the rear wheel during
normal riding.
When you stop the bicycle,
the gear does not shift to
the position preset in the
start mode.
Cause / Possibility
The gear position is only displayed when
the power gear shifting unit is installed.
The product is designed so that if it detects
that the bicycle is being ridden, the Setting
menu cannot be launched. This is not a sign
of an abnormality.
Cause / Possibility
Operation of the switch being pressed has
been disabled.
An error or warning is occurring.
This occurs because the level of assistance is
being adjusted to the optimum level by the
computer control.
Gear shifting adjustment may not have
been carried out correctly.
You may have been pressing the pedals too
strongly.
Check if the electric wire connector is
disconnected. If you are not sure, contact
the place of purchase.
Change the setting.
Refer to "Beep (Beep setting)".
Change the setting.
Refer to "Backlight (Backlight setting)".
Stop the bicycle and then make the
settings.
It is not a sign of a malfunction.
This occurs when a warning or error is
displayed on the cycle computer. Refer to
the section "Error messages on the cycle
computer" and follow the instructions
provided for the appropriate code.
It is not a sign of a malfunction.
Contact the place of purchase.
For mechanical gear shifting
Adjust the cable tension. For details, refer
to the Service Instructions for the derailleur.
For powered gear shifting
Contact the place of purchase.
If you press the pedals lightly, the gear
shifts more easily.
43
Remedy
Remedy