Shimano Ultegra SM-BCR1 Посібник

Переглянути онлайн або завантажити pdf Посібник для Скутер Shimano Ultegra SM-BCR1. Shimano Ultegra SM-BCR1 2 сторінки.
Також для Shimano Ultegra SM-BCR1: Посібник користувача (2 сторінок), Посібник користувача (2 сторінок)

Друкувати сторінку

SI-7DG0A-002-00

The following instructions must be observed at all times in order to prevent personal injury and physical damage to equipment

and surroundings.

The instructions are classified according to the degree of danger or damage which may occur if the product

is used incorrectly.

DANGER

Failure to follow the instructions will result in death or serious injury.

WARNING

Failure to follow the instructions could result in death or serious injury.

Failure to follow the instructions could cause personal injury or physical damage to equipment and

CAUTION

surroundings.

Be sure to observe the following in order to avoid burns or other injury from fluid leakages, overheating, fire or

explosions.

Do not get the charger wet or use it while it is wet, and do not

touch or hold it with wet hands.

Do not cover the charger with a cloth or similar while it is in

use.

Do not disassemble or modify the charger.

Use the charger at the specified power supply voltage only.

Be sure to hold the power cable by the power plug when

connecting and disconnecting the power plug from the

electrical outlet.

Do not touch metallic parts of the charger or the AC adapter if

there is a lighting storm.

Do not overload the electrical outlet with appliances beyond its

rated capacity, and use only a 100 – 240 V AC electrical outlet.

Do not damage the power cord or power plug.

(Do not damage, process, forcibly bend, twist or pull them,

bring them near hot objects, place heavy objects on them or

bundle them tightly together.)

Do not use the charger with commercially-available electrical

transformers designed for overseas use, as they may damage

the charger.

Always be sure to insert the power plug as far as it will go.

Disconnect the power plug from the electrical outlet before cleaning the charger.

Technical Service Instructions

SM-BCR1

Battery Charger

Main specifications

Input

Output

Dimensions

Weight

Operating temperature

Storage temperature

DANGER

If this is not observed, problems with operation or electric

shocks may occur.

If this is not observed, heat may build up and the case may

become deformed, or fire or overheating may occur.

If this is not observed, electric shocks or injury may occur.

If a power supply voltage other than that specified is used,

fire, explosions, smoke, overheating, electric shocks or

burns may occur.

WARNING

If you do not hold the power cable by the power plug, fire or

electric shocks may occur.

* If heat or acrid-smelling smoke is coming out from the

power plug

* There may be a bad connection inside the power plug.

If lightning strikes, electric shocks may occur.

If the electrical outlet is overloaded by connecting too many

appliances using adapters, overheating resulting in fire may

occur.

If they are used while damaged, fire, electric shocks or

short-circuits may occur.

If this is not observed, fire may occur.

CAUTION

SI-7DG0A-002

100 -- 240 V AC, 50/60 Hz

8.4 V DC, 0.55 A

Approx. 100 mm (W) x 30 mm (H) x 72 mm (D)

Approx. 110 g

0 – 45 °C

-20 – 70 °C

Names of parts

Charger (SM-BCR1)

This charger is a special charger for use in charging Shimano lithium ion

batteries (SM-BTR1). Never insert any other type of batteries, otherwise

bursting or fire may occur.

* Make sure that you thoroughly understand the general Safety Information

for this product before use.

Electrical contacts:

Power cord

If these are modified or

connector

damaged, problems with

operation will occur.

Be very careful when

handling them.

ERROR indicator:

This flashes when there

is an error.

Power cord:

Insert into the connector.

CHARGE indicator:

* Insert as far as it will go.

This illuminates while

charging is in progress.

Charger cord

< Sold separately >

Type No.

USA/Canada : SM-BCC1 2

UK : SM-BCC1 6

Special battery (SM-BTR1)

This is a lithium ion battery. Use the special charger (SM-BCR1) to charge it.

Never use any other charger to charge the battery, otherwise bursting or fire

may occur.

Electrical contacts:

If these are modified or damaged,

problems with operation will occur.

Be very careful when handling them.

Charging method

Insert the power plug of the charger into an electrical

outlet.

Insert the battery (SM-BTR1) into the charger (SM-

BCR1) as far as it will go.

* The charging time is approximately 1.5 hours.

(Note that the actual time will vary depending on

the amount of charge remaining in the battery.)

When the CHARGE indicator (orange)

switches off, charging is complete.

* If the ERROR indicator flashes, it

means that there may be a

problem with the battery. Refer to

"Error Judgment Details" for more

information.

Disconnect the power plug of the

charger from the electrical outlet and

store the charger in a suitable place

as specified in the Safety Precautions.

Error Judgment Details

What to do if an error occurs

• Remove the battery from the charger,

disconnect the power plug of the

charger from the electrical outlet, and

then repeat the charging operation.

• If charging is still not possible after the

above steps have been carried out,

the ambient temperature may be too

low or too high, or there may be a

problem with the battery.

Illuminates orange

If charging is not possible, the

ERROR indicator on the charger

will flash.