Shimano SG-8C20 Посібник з експлуатації - Сторінка 25
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Промислове обладнання Shimano SG-8C20. Shimano SG-8C20 36 сторінок. Inter-8 coaster hub
Також для Shimano SG-8C20: Інструкція з технічного обслуговування (4 сторінок)
13.
Align the internal tooth on
the ring gear and carrier unit
with the groove in the hub
axle unit. Install ring gear
and carrier unit slowly.
(Y-041020800)
NOTE:
Be careful to fit A to A and B to B
of the driver unit and the hub
axle unit as shown in the picture.
Important:
To set all four pawls in the correct
position.
Use a flat blade screwdriver to
depress pawls, as shown, during
assembly. Turn unit and check
that all pawls are in the proper
position.
(Y-041 20600)
A
B
Pawls
B
A
25