Digital Audio Labs LIVEMIX DA-816 Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису Digital Audio Labs LIVEMIX DA-816. Digital Audio Labs LIVEMIX DA-816 13 сторінок.
Також для Digital Audio Labs LIVEMIX DA-816: Посібник користувача (13 сторінок)
Друкувати сторінку
UNASSIGN AN OUTPUT
To unassign a previously assigned output, simply:
1. Select the DA-816 Output from the DA-816
Output screen.
2. PRESS the Unassign Output button.
3. The Output is now unassigned.
USING THE OUTPUT ID FEATURE
The Output ID feature sends a test tone to the
selected DA-816 Output. This allows you to verify
that the desired external device is connected to the
selected output.
1. PRESS the Output ID button. The Output ID
button will flash.
2. Select one or more Output Slots. When selected,
the slot will turn gray with a white border.
3. When an Output Slot is selected, the
corresponding LED on the front of the DA-816
will flash and a test tone will sound.
4. PRESS the Output ID button again to exit this
mode. The Output ID button will stop flashing.
NOTE:
Observe the VU meters on the connected
wireless transmitters or devices. The DA-816
sends audible beeps in this mode to confirm
the intended signal chain is setup properly.
The Output ID is a great way to:
• Quickly ensure musicians are given the
correct wireless bodypacks and are assigned
to the correct CS-DUO's on stage.
• Test which device is connected to the
DA-816 outputs.
• Verify proper connection from DA-816 to
external devices.
LIVEMIX DA-816
8