Accutone USB400 VoIP COMMUNICATION HEADSET Посібник з інсталяції та посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з інсталяції та посібник користувача для Гарнітури Accutone USB400 VoIP COMMUNICATION HEADSET. Accutone USB400 VoIP COMMUNICATION HEADSET 12 сторінок. Voip communication headset
Також для Accutone USB400 VoIP COMMUNICATION HEADSET: Посібник з монтажу та інструкція користувача (8 сторінок)

Друкувати сторінку

Troubleshooting.

Verification.

D1. verifying successful installation of the drivers

For First-time Users

You have followed all the instructions so far, but there's still no sound

coming from the headset speakers, the most basic thing to do is double-

checking whether the drivers have been properly installed.

The simplest way to check whether the USB controller is properly

installed, make sure the LED indicator is lit, and press mute to see if the

color changes, if so, then the device is properly installed, if not you should

check the details settings as suggested below.

For most Windows operating systems (Windows 98SE, Windows ME, Windows 2000

Professional, Windows XP and Windows Vista), you can verify the installation of the

USB Audio Device - driver by looking into the Device Manager:

click on Start, Settings, and Control Panel.

in control panel, click on the System icon

open up the System Properties page

click on the Device Manager tab

(or Hardware tab and then Device Manager button for Windows XP)

in Device Manager, make sure that the View Device by Type is selected.

verifying successful installation of drivers

configuring your audio devices

frequently asked question

USB400 - Installation Guide & User Manual

D1. verifying successful installation of the drivers

Checking the drivers within the Device Manager

scroll down and find the Universal Serial Bus Controllers category

open it up and see if you can find the USB Composite Device

if yes close it and look for the Sound Video and Game Controllers category

open it up and find the USB Sound Device (or Accutone Audio adaptor)

if you see both these drivers installed, then the installation is successful

if you cannot locate them, try to unplug the USB controller, re-boot the machine, and

do the installation again or check the troubleshooting section in this manual.

D2. configuring your audio devices

For computers which come with an in-built sound card, your have a choice of using the

USB audio device or the original sound card for your multimedia applications. To

configure the currently selected audio device:

go to the Control Panel, click the

M u l t i m e d i a i c o n o r S o u n d s a n d

Multimedia icon(for Windows Me, 2000

and XP)

select the Audio or Voice tabs, in either one

of the pages you will see Preferred Device

selected for Sound Playback or Sound

Recording to be Accutone USB Audio

Adaptor or USB Audio Adaptor

click the arrow within the selection and you

will find your original sound card's name and

choose your preference

(**Remember to close all programs before

you change this settings. Restart your audio

applications if the change is not effective.)

USB400 - Installation Guide & User Manual

[ inspiring people, inspiring change ]

Configuration.