Actron AutoScanner OBD II Scan Tool CP9575 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Медичне обладнання Actron AutoScanner OBD II Scan Tool CP9575. Actron AutoScanner OBD II Scan Tool CP9575 16 сторінок. Autoscanner obd ii scan tool
Друкувати сторінку
MIL Status
MIL (Malfunction Indicator Lamp) status indicates if the vehicle com-
puter is telling the MIL to illuminate when the engine is running.
• MIL ON indicates that the check Engine Light should be ON.
• MIL OFF indicates that the Malfunction Indicator Lamp
should be OFF.
I/M Monitors
Inspection / Maintenance Monitors provide a snapshot of the Emission
System operations by indicating that the I/M Monitors are Ready or
Not Ready. For an I/M Monitor to be Ready, the vehicle must have
completed a drive cycle (been driven long enough under proper
conditions to have completed a drive cycle). A Monitor must be listed
as Ready to pass an emissions test. If an I/M Monitor is Not Ready,
it is because a drive cycle has not completed.
The Tool will indicate Ready (ok), Not Ready (inc), or Not Applicable
(n/a) for each I/M Monitor. The Tool supports the following I/M Monitors:
Monitors
Misfire Monitor
Fuel System Mon
Comprehen Comp
Catalyst Mon
Htd Catalyst
Evap System Mon
Sec Air System
A/C Refrig Mon
Oxygen Sens Mon
Oxygen Sens Htr
EGR System Mon
This is a complete list of I/M Monitors supported by the Tool. The
number of Monitors read by the Tool from your vehicle may vary. A
diesel vehicle, for example, does not have an Oxygen Sensor Moni-
tor. As a result, there will be no Oxygen Sensor Monitor status for a
diesel vehicle.
Two types of I/M Monitors tests are:
Expanded Name
Misfire Monitor
Fuel System Monitor
Comprehensive Components Monitor
Catalyst Monitor
Heated Catalyst Monitor
Evaporative System Monitor
Secondary Air System Monitor
Air Conditioning Refrigerant Monitor
Oxygen Sensor Monitor
Oxygen Sensor Heater Monitor
Exhaust Gas Recirculation Monitor
8