Crestron Electronics M201907002 Посібник з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Блок розподілу електроенергії Crestron Electronics M201907002. Crestron Electronics M201907002 12 сторінок. Fliptop ac power outlet module, single, jp nema 5, type b

Друкувати сторінку

6. Orient the power outlet module as shown in the following illustration and slide it down into the

appropriate module slots. Use the guide ribs on the front and rear of the module to help position it

in the assembly.

7. Add any other modules back into the assembly and confirm that all modules are level with their

surroundings.

8. Place the locking bars (removed in step 3) into position so that the screws on either side engage

the screw holes in the assembly.

9. Using a manual torque screwdriver set to its lowest possible setting, hand tighten the locking bar

screws until the locking bars are secured to the FT2 FlipTop assembly.

10 • FT2A-PWR-JP-1-BASIC

Product Manual — Doc. 9401A