Digital Data Communications Level One GTL-2091 Посібник - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник для Перемикач Digital Data Communications Level One GTL-2091. Digital Data Communications Level One GTL-2091 9 сторінок. Stp optional characteristic configuration commands
Також для Digital Data Communications Level One GTL-2091: Посібник (14 сторінок), Посібник (6 сторінок), Посібник (5 сторінок), Посібник (18 сторінок)
Друкувати сторінкуChapter 1 STP Optional Characteristic Configuration
1.1 STP Optional Characteristic Configuration Commands
1.1.1
spanning-tree portfast
Description
To enable bridge protocol data unit (BPDU) filtering by default on all PortFast ports,
use the spanning-tree portfast command in global configuration mode. To return to
the default settings, use the negative form of this command.
spanning-tree portfast {bpdufilter default | bpduguard default | default}
no spanning-tree portfast {bpdufilter default | bpduguard default | default}
To enable PortFast mode where the interface is immediately put into the forwarding
state upon linkup without waiting for the timer to expire, use the spanning-tree portfast
command in interface configuration mode. To return to the default settings, use the
negative form of this command.
spanning-tree portfast [disable | trunk]
no spanning-tree portfast
Parameter
Parameter
bpdufilter default
bpduguard default
default
Default
Disabled
Instruction
In SSTP/PVST mode, the Port Fast characteristic makes a port immediately enter
Forwarding state without experiencing any status change process. This configuration is
invalid in RSTP/MSTP mode.
http://www.level1.com
STP Optional Characteristic Configuration Commands
Commands
Enables bpdu flter.
Enables bpdu guard.
Specifies the default method.
Description
- 1 -