BitRage CR45-A-58 Посібник зі встановлення та налаштування - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник зі встановлення та налаштування для Трансивер BitRage CR45-A-58. BitRage CR45-A-58 12 сторінок.

Друкувати сторінку
Section 2 .
Basic Safety
Guidelines
xxxx, Ver. 0.01

Installing the Equipment

[Overview info]
The following general guidelines should always be followed when installing
or doing maintenance work on any electrical or radio equipment
? ? Do not locate the transceiver near overhead power lines or other electric
light or power circuits, or where it can come into contact with such
circuits.
? ? Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate
electrical inspection authority or an electrician if you are uncertain that a
suitable grounding is available.
? ? Do not work on the system or connect or disconnect cables during
periods of lightning activity.
? ? Disconnect all power and external cables before moving a chassis.
? ? Do not work alone if potentially hazardous conditions exist.
? ? Always verify that power has been disconnected from a circuit; never
assume it has been.
? ? Do not perform any action that creates a potential hazard to people or
makes the equipment unsafe.
? ? Carefully examine your work area for possible hazards such as moist
floors, ungrounded power extension cables, and missing safety fuses.
Warning: This equipment contains an energy hazard. Disconnect the system
before servicing.
2-1