Digital Electronics PS3650A-T41 Посібник - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник для Зберігання Digital Electronics PS3650A-T41. Digital Electronics PS3650A-T41 20 сторінок.

Друкувати сторінку

• The following explanation uses the PS-A unit's factory settings.

(1) Install the HDD unit in the PS-A.

SEE

(If the HDD unit is already installed, this step is not necessary.)

(2) Connect a keyboard to the PS-A.

(3) Right after turn the PS-A unit's power ON, keep on pressing [F2] key. The Setup

utility will start.

(4) Point the cursor to [Primary Master] on [Main] menu and press the [Enter] key and

the following screen appears.

Main

Type:

Total Sectors:

Maximum Capacity:

Multi-Sector Transfer:

LBA Mode Control:

32 Bit I/O:

Transfer Mode:

Ultra DMA Mode:

(5) Confirm whether "AUTO" is selected for [Type]. (The factory setting is "AUTO"

and recommended for most users.)

(6) Press the [ESC] key and the screen returns to the previous one. Select [Exit] menu

and point the cursor to [Exit Saving Changes] and press the [Enter] key. The system

settings will be saved and this process will exit and the OS will then start.

2 Installation

[Auto]

[16 Sectors]

[Enabled]

[Disabled]

[FPIO 4 / DMA 2]

[Mode 5]

User = you enter

Parameters of hard-disk

drive installed at this

connection.

Auto = autotypes

hard-disk drive

installed here.

1-39 = you select

pre-determined type of

hard-disk drive

installed here.

CD-ROM = a CD-ROM drive

is installed here.

ATAPI Removable =

removable disk drive is

installed here.

Item Specific Help