Digital Electronics PS371XA-SD16P Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу для Зберігання Digital Electronics PS371XA-SD16P. Digital Electronics PS371XA-SD16P 8 сторінок. Ssd unit

Друкувати сторінку

When attaching the HDD/SSD

to the PS-3711A

(1) Place the PS-A unit face down and

unscrew eight (8) attachment screws.

(See diagram).

(2) Lift the PS-A unit's Rear Cover off of the

PS-A unit.

As for AC type, remove the power cover

as shown below.

PS-A unit's Rear Cover

(3) Insert the HDD/SSD unit cable

connector completely into the IDE I/F.

Attach the HDD/SSD unit using four (4)

attachment screws.

The torque should be 0.5 to 0.6 N·m.

(4) Replace the PS-A unit's Rear Cover and

reattach eight (8) attachment screws.

As for AC type, replace the power cover

and reattach the screws.

The torque should be 0.5 to 0.6 N·m.

IDE I/F