Digital Electronics Corporation PS345XA-HD40 Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Зберігання Digital Electronics Corporation PS345XA-HD40. Digital Electronics Corporation PS345XA-HD40 8 сторінок.

Друкувати сторінку

When attaching the HDD to the PS-3450A

(1) Unscrew the screws (2) from the Expan-

sion Board Cover, and remove the cover.

When replacing the cover, the torque

required for these screws is 0.5 to 0.6

N•m.

(2) Unscrew the screws (2) of the HDD

cover and remove the HDD cover.

When replacing the cover, the torque

required for these screws is 0.5 to 0.6

N•m.

(3) Unscrew the screws (4) of the HDD unit,

remove the cable connector from IDE I/F

while lifting up the HDD unit, and

remove it.

To replace the HDD unit, connect the

cable connector to IDE I/F securely and

fix the HDD unit with the screws (4). The

torque required for these screws is 0.5 to

0.6 N•m.

Inside of the PS-3450A' s rear

IDE I/F