Digital Electronics Corporation PS-2000B Series Посібник з монтажу - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник з монтажу для Робочий стіл Digital Electronics Corporation PS-2000B Series. Digital Electronics Corporation PS-2000B Series 16 сторінок. Windows 2000 multi language preinstalled hard disk unit
Також для Digital Electronics Corporation PS-2000B Series: Посібник з монтажу (17 сторінок)

Друкувати сторінку

HDD Recovery Procedure

•

After performing hard disk recovery, the PS-A unit's hard

disk is returned to its factory shipped condition.

•

A USB-type CD-ROM drive cannot be used to start the Re-

covery CD. Be sure to use Digital's CD-ROM/FD drive unit

(PSB-CD/FD01).

Use the following steps used to recover the Windows

Preinstalled Hard Disk.

1. Insert the Recovery CD's Disk 1 into the CD-ROM drive and turn the PS-B

unit's power ON. Immediately after the power turns ON, press the [Del] key.

The unit's BIOS setup screen will appear.

2. Select the Setup Utility Advanced BIOS Features' First Boot Device's CD-

ROM setting.

3. Press the [F10] key to save the setting and restart the unit.

4. After the unit restarts, the EasyRestore

5. After the EasyRestore

6. When the Warning screen's "You are about to destroy all of the data on drive1.

Are you sure you want to continue?" message appears, click [Yes].

7. The previously inserted Disk 1's hard disk recovery program will start. When

the message "Insert media2" appears, insert Recovery CD disk2 and press the

[Enter] key.

8. When CD Disk2's operation finishes, recovery is completed. Next, the Reboot

dialog box will appear. Click on "Reboot" and the unit will restart.

9. During the restart, press the [Del] key to enter the BIOS Setup mode.

10. In the Setup screen, set Load Optimized Defaults to reset all BIOS settings to

their original values. Next, press [F10] key to save the settings and restart the

unit.

11. After the unit restarts, set up your OS as desired.

4 OS Setup

program starts, Press the [Continue] button.

-14-

2000 Multi-Language

program will automatically start.