Bitspower Touchaqua TA-DIO14-RGB Посібник з монтажу - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу для Комп'ютерне обладнання Bitspower Touchaqua TA-DIO14-RGB. Bitspower Touchaqua TA-DIO14-RGB 15 сторінок.

Друкувати сторінку

Install the tube with fitting

Hard tube bending guide（Accessories not included）

Hard tube

Silicon strip

Remark:This step is a guideline for

beginners. With experience, you will

develop your own style of bending tubes,

1. Insert the silicon strip (sold separately) inside the hard tube.

2. Heat up evenly the area where the hard tube needs to be bent (We suggest

you use a heat gun for this step).

3. During the process of heating, please turn the hard tube to heat evenly.

4. Once the tube is hot enough to bend easily, move it to the bending tool and

bend at the desired angle.

5. We recommend using the Bitspower bending kit (BP-PTR12/BP-PTR14/BP-PTR16).

Optimum water cycle

P 8

Hard tube fitting installation guide

Hard tube installation steps:

1.Pull the fitting apart by unscrewing the sleeve

from the nut.

2.Slide the sleeve on the tube, then push the

tube into the nut over the o-ring

3.Lock the nut tightly to the sleeve using a

clockwise rotation.

OPEN