Digital Equipment RZ26 Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Зберігання Digital Equipment RZ26. Digital Equipment RZ26 16 сторінок. Installing in the digital ba42 expansion box

Друкувати сторінку

3 Checking Your System Conﬁguration

Before you begin the RZ26 drive installation, put your system in console mode

and enter the SHOW CONFIG command. (If you need instructions, see the

system's installation guide or user's guide.)

Make a note of which SCSI IDs are already being used.

You must assign a SCSI ID number to each drive installed in a BA42 expansion

box. Numbers that can be used range from 0 to 7, and you can assign each

number only once.

3.1 Setting the SCSI ID Switches on the BA42 Expansion Box

SCSI ID switches for hard disk drives installed in a BA42 expansion box are

located on the back of the expansion box behind the SCSI ID switch cover.

Remove the switch cover as shown in Figure 1.