Siemens SIMATIC NET RUGGEDCOM RS1600 Посібник з монтажу - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник з монтажу для Промислове обладнання Siemens SIMATIC NET RUGGEDCOM RS1600. Siemens SIMATIC NET RUGGEDCOM RS1600 42 сторінки. Rugged ethernet switches
Також для Siemens SIMATIC NET RUGGEDCOM RS1600: Посібник з монтажу (42 сторінок)
Друкувати сторінку
2.1.2
Mounting the Device on a DIN Rail
For DIN rail installations, the RUGGEDCOM RS1600 can be equipped with panel/DIN
rail adapters pre-installed on each side of the chassis. The adapters allow the device
to be slid onto a standard 35 mm (1.4 in) DIN rail.
To mount the device to a DIN rail, do the following:
1.
Align the adapters with the DIN rails and slide the device into place.
Figure 2.2
2.
Install one of the supplied screws on either side of the device to secure the
adapters to the DIN rails.
2.1.3
Mounting the Device to a Panel
For panel installations, the RUGGEDCOM RS1600 can be equipped with panel/DIN rail
adapters pre-installed on each side of the chassis. The adapters allow the device to
be attached to a panel using screws.
RUGGEDCOM RS1600
Installation Manual, 01/2021, C79000-G8976-1013-03
All manuals and user guides at all-guides.com
3
Panel/DIN Rail Adaptor
1
DIN Rail
2
Screw
3
DIN Rail Mounting
2.1.2 Mounting the Device on a DIN Rail
Installing Device
1
2
3
9